Micro sprinkler for flower irrigation

Micro sprinkler is one of the common methods of water saving irrigation. In the micro spray system, various types of micro sprinklers and micro jets are commonly used emitters. In facility gardening, micro sprinklers are usually hung upside down on the facility skeleton to avoid affecting the micro-spray system to irrigate other crops.

Rotary micro-sprinklers and jet micro-sprinklers are the two most common types of sprinkler systems. Under normal circumstances, the role of rotary micro-sprinklers is to irrigation; while the jet micro-sprinklers is for humidification and cooling.

To create a microclimate in the field, it is necessary to combine drip irrigation and micro-spraying, mainly by drip irrigation. The micro-spraying system is mainly used for humidification and cooling.

What you need to pay attention to when using the micro-injection system is:

1. When the micro-nozzle is installed upside down, an anti-drip device must be installed to prevent the micro-sprinkler from dripping water after the water is stopped;

2. In the facility, the micro-spray system and the drip irrigation system share a water source at the same time. Install a pressure-reducing device in the drip irrigation system or install a partial pressure device in the micro-spray system to prevent the drip irrigation system from blasting or the micro-injection system not spraying;

3. The micro-spraying device must be cleaned regularly. It is recommended to clean it after each irrigation. It is forbidden to take out the filter element.